Underhood Lamp: Service and Repair

REMOVAL PROCEDURE




1. Open the hood.
2. Disconnect the underhood lamp connector (3) from the underhood lamp (1).




3. Using a 3.18 mm (1/8 in) drill bit, remove the rivets retaining the underhood lamp (1) to the hood (2).
4. Remove the underhood lamp (1).

INSTALLATION PROCEDURE




1. Install the underhood lamp (1) to the hood (2).
2. Install the rivets (3) in order to retain the underhood lamp (1) to the hood (2).




3. Connect the underhood lamp connector (3) to the underhood lamp (1).
4. Close the hood.