A/C Temperature Sensor Replacement

REMOVAL PROCEDURE
The right [1][2]A/C temperature sensor is shown, the left is similar.




1. Remove the IP endcap.
2. Grasp the [1][2]A/C temperature sensor (1) and twist counter clockwise 1/4 turn in order to release the sensor from the A/C duct.




3. Remove the [1][2]A/C temperature sensor (1) from the duct.
4. Disconnect the electrical connector from the [1][2]A/C temperature sensor (1).
5. Remove the [1][2]A/C temperature sensor. (1).

INSTALLATION PROCEDURE




1. Connect the electrical connector to the [1][2]A/C temperature sensor (1).
2. Align the [1][2]A/C temperature sensor (1) with the air outlet duct.
Install the [1][2]A/C temperature sensor (1) into the A/C outlet duct.




3. Rotate the [1][2]A/C temperature sensor (1) 1/4 turn clockwise, in order to secure the A/C temperature sensor (1) in the A/C duct.
4. Install the IP endcap.