Crankshaft Gear/Sprocket
| Crankshaft Balancer Bolt | First Pass | 37 Foot Pound-Force (ft.lb) |
| Final Pass | +150 degrees | |
| 4.6L Engine (Vin Y) | Hub Inside Diameter | 1.3719 - 1.3726 inch |
| Outside Diameter (Without Wear Sleeve) | 1.9972 - 2.0028 inch | |
| Runout | 0.0039 inch | |
| 4.6L Engine (Vin 9) | Hub Inside Diameter | 1.3719 - 1.3726 inch |
| Outside Diameter (Without Wear Sleeve) | 1.9972-2.0028 inch | |
| Runout | 0.0039 inch |