Shift Lock Control Inoperative - With Column Shifter

Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
2. Listen for an audible click when the park relay operates. Command both the ON and OFF states. Repeat the commands as necessary.
3. Tests for voltage at the coil side of the park relay. The IGN SW Fuse supplies power to the coil side of the Dark relay through the ignition switch.
4. Verifies that the Rear Integration Module (RIM) is providing ground to the park relay.
5. Tests if ground is constantly being applied to the park relay.
13. Tests for voltage at the switch side feed circuit of the park relay. The Park/Rev Fuse supplies power to the switch side feed circuit of the park relay.