Operation CHARM: Car repair manuals for everyone.

Window Run Channel Replacement - Front Door

REMOVAL PROCEDURE




1. Remove the door trim panel.
2. Remove the door module.
3. Remove the water deflector.
4. Remove the garnish molding.
5. Remove the window inner belt sealing strip.
6. Grasp the window run channel at the lower rear corner.
7. Pull up and forward to release the run channel from the doors flange.

INSTALLATION PROCEDURE




1. Install the front and rear legs of the window run channel through the belt line.
2. Insert the window run channel into the doors flange.
3. Seat the run channel at the top corner of the center pillar, ensuring the rear notch in the doors flange is aligned with the run channels rubber block.
4. Working forward and down, seat the remaining window run over the flange, ensuring the front notch in the doors flange is aligned with the run channels rubber block.
5. Install the window inner belt sealing strip.
6. Install the garnish molding.
7. Install the water deflector.
8. Install the door module.
9. Install the door trim panel.