Door Window Sealing Strip

Rear Door Window Belt Inner Sealing Strip Replacement

Removal Procedure

1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Standard) (Rear Side Door Trim Panel Replacement (Standard)) .




2. Starting at one end of the inner window belt sealing strip, pull upward to release the sealing strip from the door flange.



Installation Procedure





1. Position the inner window belt sealing strip over the door flange.
2. Position the notch in the sealing strip to the stationary window frame.
3. Press downward to engage the sealing strip the entire length of the door, being careful not to distort the sealing strip.
4. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Standard) (Rear Side Door Trim Panel Replacement (Standard)) .