A Symptoms - Wiper/Washer Systems

IMPORTANT: Review the system operation in order to familiarize yourself with the system functions.

VISUAL/PHYSICAL INSPECTION
^ Inspect for aftermarket devices which could affect the operation of the Wipers/Washer System. Refer to Checking Aftermarket Accessories in Diagrams.
^ Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
^ Inspect the windshield washer reservoir for the proper fluid level.

INTERMITTENT
Faulty electrical connections or wiring may be the cause of intermittent conditions.

SYMPTOM LIST
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
^ Wipers All Modes Inoperative
^ Wipers Delay Mode Inoperative (W/O CE1) or Wipers Delay Mode Inoperative (W/ CE1)
^ Wipers High Mode Inoperative, Low Mode Operates
^ Wipers Low Mode Inoperative, High Mode Operates
^ Wipers Always On
^ Wipers Blades Do Not Park
^ Washers Inoperative
^ Washers Always On
^ Wiper Arm Tip Pressure Check, Blade Element Check
^ CHECK WASHER FLUID Message Always On
^ CHECK WASHER FLUID Message Inoperative

For a description of the RPO Code(s) shown in this image/article refer to the RPO Code List found at Vehicle/Application ID RPO Codes