Trunk / Liftgate Weatherstrip: Service and Repair

Rear Compartment Lid Weatherstrip Replacement

Removal Procedure

1. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement (Service and Repair) .




2. Carefully pull up the weatherstrip (1) from the pinchweld flange (2).
3. Clean any adhesive from the pinchweld flange (2).



Installation Procedure





1. Starting at the top forward center of the opening, install the weatherstrip (1) to the flange.
2. Ensure that the weatherstrip (1) is fully seated to the pinchweld flange (2).
3. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement (Service and Repair) .