Seat Back Frame Replacement

Seat Back Frame Replacement

Removal Procedure





1. Remove the seat. Refer to Bucket Seat Replacement (Bucket Seat Replacement) .
2. Remove the seat back cover. Refer to Seat Back Cover and Pad Replacement (Seat Back Cover and Pad Replacement) .
3. Disconnect the electrical connectors from the power seat switch/lumbar switch assembly.
4. Remove the seat cushion cover by unhooking the J-channel from the seat frame.
5. Disconnect the electrical connectors, if equipped with heated or power lumbar seats.
6. Remove the hinge bolts (2).
7. Remove the seat back frame from the seat back hinge.



Installation Procedure





1. Install the seat frame to the seat back hinge.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the hinge bolts (1).

Tighten the hinge bolts to 24 N.m (18 lb ft).

3. Install the seat cushion cover by hooking the J-channel to the seat frame.
4. Connect the electrical connectors, if equipped with the heated or power lumbar seats.
5. Connect the electrical connector power seat switch.
6. Install the seat back cover. Refer to Seat Back Cover and Pad Replacement (Seat Back Cover and Pad Replacement) .
7. With the aid of an assistant, install the seat. Refer to Bucket Seat Replacement (Bucket Seat Replacement) .
8. Reposition the seat.