Operation CHARM: Car repair manuals for everyone.

Oil Pump Pipe and Screen Assembly Replacement

Replacement

Removal Procedure
1. Remove the transaxle assembly. Refer to Transmission Replacement in Transmission and Drivetrain
2. Remove the exhaust crossover pipe. Refer to Exhaust Crossover Replacement.
3. Remove the engine oil pan. Refer to Oil Pan Replacement.





4. Remove the oil pump pickup tube support nut (2) from the main bearing stud.
5. Remove the mounting bolt (4) from the oil manifold plate.
6. Remove the oil pump pickup tube (1).
7. Remove the pick-up tube O-ring (3).

Installation Procedure





1. Lubricate the silicone seal in the oil manifold plate. With a twisting motion, install the end of the oil pump pick-up tube (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the oil pump pick-up retaining bolt (4) and nut (2).
^ Tighten the oil pump pick-up tube nut to 24 Nm (18 ft. lbs.).
^ Tighten the oil pump pick-up tube bolt to 10 Nm (89 inch lbs.).
3. Install the oil pan. Refer to Oil Pan Replacement.
4. Install the exhaust crossover pipe. Refer to Exhaust Crossover Replacement.
5. Install the transaxle assembly. Refer to Transmission Replacement in Transmission and Drivetrain.