Backup Lamp: Service and Repair

REMOVAL PROCEDURE




1. Remove the license plate pocket.
2. Remove the backup lamp bulb.
3. Remove the screws which retain the backup lamp to the license plate pocket.




4. Remove the backup lamp.

INSTALLATION PROCEDURE




1. Install the backup lamp to the license plate pocket.
2. Install the backup lamp bulb.

NOTE: Refer to Fastener Notices in Service Precautions




3. Install the screws which retain the backup lamp to the license plate pocket.

Tighten
Tighten the screws to 2 N. m (18 lb in).

4. Install the license plate pocket.