High Note

REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Disconnect the electrical connector on the horn assembly.
3. Remove the bolt securing the horn assembly to the vehicle.
4. Remove the horn assembly.

INSTALLATION PROCEDURE
1. Locate the mounting tab on the horn assembly to the hole in the vehicle body.

NOTE: Refer to Fastener Notices in Service Precautions.

2. Install the bolt securing the horn assembly to the vehicle.

Tighten
Tighten the bolt to 17 N.m (12 lb ft).

3. Connect the electrical connector to the horn assembly.
4. Lower the vehicle.