Low Note

REMOVAL PROCEDURE




1. Remove the tiller panel.




2. Remove the battery.
3. Disconnect the electrical connector from the horn assembly.
4. Remove the bolt holding the horn to the vehicle.
5. Remove the horn.

INSTALLATION PROCEDURE




1. Locate the mounting tab on the horn assembly to the hole in the vehicle body.

NOTE: Refer to Fastener Notices in Service Precautions.

2. Install the bolt securing the horn assembly to the body.

Tighten
Tighten the bolt to 11 N.m (97 lb in).

3. Connect the electrical connector.
4. Install the battery.




5. Install the filler panel.