Operation CHARM: Car repair manuals for everyone.

Oil Level Sensor: Service and Repair




REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
2. Disconnect the electrical connector (2) from the oil level sensor (1).
3. Remove the oil level sensor from the oil pan.

INSTALLATION PROCEDURE
1. Install the oil level sensor (1) in the oil pan.

Tighten
Tighten the oil level sensor to 20 N.m (15 lb ft).

2. Connect the electrical connector (2) to the oil level sensor.
3. Lower the vehicle.