Inside Air Temperature Sensor Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the instrument panel upper trim panel.
3. Disconnect the aspirator hose (2) from the sensor (1).
4. Disconnect the electrical connector (3).
5. Remove the retaining screw (4) from the inside air temperature sensor (1).
6. Remove the inside air temperature sensor (1).

INSTALLATION PROCEDURE




1. Secure the temperature sensor (1) with the retaining screw (4).
2. Connect the electrical connector (3).
3. Install the aspirator hose (2) to the sensor (1) and clip.
4. Install the instrument panel upper trim panel.
5. Connect the negative battery cable.