Connecting Rod Specifications
Diameter, Crankshaft End (Without Bearings) | 2.2495-2.2501 | ||
Taper (Maximum) | 0.0002 in | ||
Piston Pin End, With Bushing | 0.8269-0.8274 | ||
Taper (Maximum) | 0.0003 in | ||
Without Bushing | 0.9234-0.9421 in | ||
Width | 0.8572 in | ||
Center to Center | 5.9449 | ||
Side Clearance (Pair of Connecting Rods on Crankpin) | 0.0079-0.0197 | ||
Connecting Rod Bolt | First Pass | 22 | |
Second Pass | Back off to zero | ||
Third Pass | 18 | ||
Final Pass | +110 degrees |