Battery Replacement
REMOVAL PROCEDURE1. Remove the right headlamp cover.
2. Remove the right upper side rail gusset.
3. Disconnect the negative battery cable.
4. Disconnect the positive battery cable.
5. Remove the battery retainer.
6. Remove the battery from the vehicle.
INSTALLATION PROCEDURE
1. Install the battery into the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the battery retainer.
Tighten
Tighten the battery retainer bolt to 17 N.m (13 lb ft).
3. Connect the positive battery cable.
Tighten
Tighten the positive battery cable to 17 N.m (13 lb ft).
4. Connect the negative battery cable.
5. Install the right upper side rail gusset.
Tighten
Tighten the bolts to 20 N.m (15 lb ft).
6. Install the right headlamp cover. Refer to Filler Panel Replacement - Upper in Body Front End.