| Camshaft Material | Hardened Cast Grey Iron |
| Bearing Number | 5 |
| Bearing Number on Left Cylinder Head Intake | 6 |
| Bearing Clearance | 0.0020 - 0.0030 Inch (in) |
| Production Limits | 0.0015 - 0.0035 Inch (in) |
| Service Limits - Maximum | 0.0035 Inch (in) |
| Runout | 0.0020 Inch (in) |
| Out-of-Round | 0.0002 Inch (in) |
| Straightness | 0.0003 |
| Thrust Width | 0.0003 |
| Timing (@ 0.150 mm Lift), Intake Opens | 5.6 degrees BTDC |
| Intake Centerline | 113 degrees ABDC |
| Intake Closes | 236.8 degrees ABDC |
| Exhaust Opens | 222.5 degrees BTDC |
| Exhaust Centerline | 107 degrees BTDC |
| Exhaust Closes | 13.8 degrees ABDC |
| Camshaft Lift, Intake | 0.2421 Inch (in) |
| Exhaust | 0.2339 Inch (in) |
| |
| |
| Duration (@ 0.150 mm Lift), Intake | 242 degrees |
| Exhaust | 236 degrees |
| Valve Overlap (@ 0.150 mm Lift) | 1.98 degrees |
| Left Intake Water Pump Drive End, Diameter | 0.6241 - 0.6261 |
| Diameter Within Last (0.7677 in.) | 0.6249 - 0.6253 |
| Runout | 0.0059 Inch (in) |