Glove Compartment: Adjustments

Instrument Panel Compartment Door Lock Striker Adjustment




1. Open the instrument panel (I/P) compartment door.
2. Remove the striker covers.




3. Loosen the striker bolts.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Adjust the strikers to full forward position, about 1/8 inch, for proper engagement with the latch mechanism.

Tighten the bolts to 2 Nm (18 lb in).

5. Close the I/P compartment door to verify smooth latch engagement. Reposition the strikers until smooth latch engagement is obtained.
6. Install the striker covers.