Door Locking Rod/Bellcrank Replacement - Rear

REMOVAL PROCEDURE




1. Remove the door trim panel.
2. Remove the door water deflector.
3. Remove the inside door handle.
4. Remove the bellcrank center plastic pin, using a small punch.
5. Remove the bellcrank from the retainer.
6. Remove the lock rod from the bellcrank.

INSTALLATION PROCEDURE




1. Install the bellcrank lock rod.
2. Install the bellcrank to the retainer.
3. Install the bellcrank center plastic pin into the retainer by pushing inward.
4. Install the inside door handle.
5. Install the door water deflector.
6. Install the door trim panel.