Lock Replacement - Rear Door

REMOVAL PROCEDURE




1. Remove the door trim panel.
2. Remove the door water deflector.
3. Remove the inside door handle.
4. Remove all the rods that attach to the lock assembly.
5. Remove the rear door lock actuator electrical connector.
6. Remove the rear door lock screws.
7. Remove the door lock.

INSTALLATION PROCEDURE




1. Position the rear door lock to the rear door.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the rear door lock screws.

Tighten
Tighten the rear door lock screws to 8 N.m (71 lb in).

3. Install the rear door lock actuator electrical connector.
4. Install all the rods that attach to the lock assembly.
5. Install the inside door handle.
6. Install the door water deflector.
7. Install the door trim panel.