Slider Adjustment

Slider Adjustment

1. Slide the sunshade to the fully open position.
2. Remove the sunroof glass panel.




3. Loosen the right and left slide adjustment bolts.

Important: The right and left slides must be in full rearward position to ensure alignment.


4. Apply slight pressure to the slides to keep them tightly in place.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Tighten the slide adjusment bolts.

Tighten the slide adjustment bolt to 5 Nm (44 lb in).

6. Install the sunroof glass panel.
7. Close the sunshade.