Power Seat Switch: Service and Repair

Power Seat Switch Replacement

Removal Procedure

1. Remove the front seat. Refer to Driver or Passenger Seat Replacement (Left Front) (Driver or Passenger Seat Replacement (Left Front))Driver or Passenger Seat Replacement (Right Front) (Driver or Passenger Seat Replacement (Right Front)).
2. Remove the outer finish panel from the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement (Seat Cushion Outer Trim Panel Replacement).




3. Disconnect the electrical connectors from the seat adjuster control switch. The wiring harness is routed under the front seat cushion frame and is secured by tie downs.
4. Remove the seat adjuster control switch.

Installation Procedure




1. Install the seat adjuster control switch.
2. Connect the electrical connectors to the seat adjuster control switch.
3. The wiring harness is routed under the front seat cushion frame. Secure the wiring harness to the seat frame with tie straps in order to prevent damaging.
4. Install the outer finish panel to the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement (Seat Cushion Outer Trim Panel Replacement).
5. Install the front seat. Refer to Driver or Passenger Seat Replacement (Left Front) (Driver or Passenger Seat Replacement (Left Front))Driver or Passenger Seat Replacement (Right Front) (Driver or Passenger Seat Replacement (Right Front)).