Rear Seat Back Cushion Inner Hinge Replacement

Rear Seat Back Cushion Inner Hinge Replacement

Removal Procedure

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).
2. Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Replacement (Rear Seat Back Cushion Replacement).
3. Remove the rear seat back center armrest. Refer to Rear Seat Armrest Replacement (Rear Seat Armrest Replacement).




4. Remove the rear seat back inner hinge bolt and nut from armrest support.
5. Remove the rear seat back inner hinge.

Installation Procedure




1. Install the rear seat back inner hinge.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear seat back hinge bolt and nut to armrest support.

Tighten the rear seat back inner hinge bolt and nut to 20 Nm (15 lb ft).

3. Install the rear seat back center armrest. Refer to Rear Seat Armrest Replacement (Rear Seat Armrest Replacement).
4. Install the rear seat back cushion. Refer to Rear Seat Back Cushion Replacement (Rear Seat Back Cushion Replacement).
5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).