Rear Seat Back Cushion Replacement

Rear Seat Back Cushion Replacement

Removal Procedure

1. Fold down rear seat back cushion.




2. Remove the rear seat back cushion retaining clips.




3. Remove the rear seat back hinge bolts.
4. Disconnect rear seat back heating element wiring connection.
5. Remove the rear seat back from vehicle.

Installation Procedure

1. Install the rear seat back to vehicle.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear seat back hinge bolts.

Tighten the rear set back hinge bolts to 20 Nm (15 lb ft).

3. Connect rear seat back heating element wiring connection.




4. Install the rear seat back cushion retaining clips.
5. Install the rear seat back to original position.