Manual Seat Lumbar Support Replacement

Manual Seat Lumbar Support Replacement

Removal Procedure

1. Remove the front seat. Refer to Driver or Passenger Seat Replacement (Left Front) (Driver or Passenger Seat Replacement (Left Front))Driver or Passenger Seat Replacement (Right Front) (Driver or Passenger Seat Replacement (Right Front)).
2. Remove the back cushion cover. Refer to Driver or Passenger Seat Back Cushion Cover Replacement (Driver or Passenger Seat Back Cushion Cover Replacement).




3. Remove the screws from the lumbar adjuster cable.




4. Remove 6 springs and the lumbar adjuster plate from the seat back frame.

Installation Procedure




1. Install the lumbar adjuster plate to the seat back frame. secure the frame with 6 springs.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws to the lumbar adjuster plate cable.

Tighten the screws to 2 Nm (18 lb in).

3. Install the back cushion cover. Refer to Driver or Passenger Seat Back Cushion Cover Replacement (Driver or Passenger Seat Back Cushion Cover Replacement).
4. Install the front seat. Refer to Driver or Passenger Seat Replacement (Left Front) (Driver or Passenger Seat Replacement (Left Front))Driver or Passenger Seat Replacement (Right Front) (Driver or Passenger Seat Replacement (Right Front)).