65. Oil Pan Installation - Lower

Oil Pan Installation - Lower





1. Install the oil level sensor to the oil pan (if removed).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the oil level sensor bolts.
Tighten the oil level sensor bolts until fully seated. Do not strip the oil level sensor bolts.





3. Install the oil pan gasket.





4. Install the oil level sensor wire electrical connector to the upper oil pan and secure with the C-clip (1).





5. Install the lower oil pan to the upper oil pan.
6. Install the lower oil pan bolts.
Tighten the lower oil pan bolts to 8 Nm (71 inch lbs.).