76. Camshaft Cover Installation - Right

Camshaft Cover Installation - Right





1. Lightly coat the new seals, including the O-rings, with engine oil prior to installation to assist in holding the O-ring seals to the camshaft cover.
2. Install the camshaft cover seals.





3. Apply a thin coat of silicone sealer GM P/N 12346240 at the front and at the back of the seals.
4. Install the camshaft cover to the cylinder head.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the camshaft cover bolts.
Tighten the camshaft cover bolts to 8 Nm (71 inch lbs.).
6. Install the coil cassette.
7. Install the coil cassette retainer bolts.
Tighten the coil cassette retainer bolts to 8 Nm (71 inch lbs.).