Blower Control Module Replacement
BLOWER CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the I/P compartment.
2. Disconnect the blower control module electrical connector.
3. Disconnect the blower motor electrical connector.
4. Release the blower control module retainer tabs.
5. Remove the blower control module from the blower motor housing.
INSTALLATION PROCEDURE
1. Position the blower control module to the blower motor housing.
2. Connect the blower control module retainer tabs. Ensure the retainer tabs are fully seated.
3. Connect the blower motor electrical connector.
4. Connect the blower control module electrical connector.
5. Install the I/P compartment.