Automatic Modes
The automatic HVAC system will warm up/cool down and maintain the interior temperature of the vehicle by controlling the A/C compressor clutch, blower motor, air temperature, mode and recirculation actuators to achieve the desired temperature. For fully automatic operation, depress the left temperature knob. Blower speeds will change automatically based on inputs to the heater and A/C control.In cold temperatures, the automatic HVAC system will provide heat in the most efficient manner. On cold engine start-up, low blower speed will be selected and airflow will be directed on the windshield. This is done to prevent windshield fogging. To warm the interior quickly, maximum heat mode is used where the blower is at maximum speed, floor mode, air temperature actuator is in full hot and outside air is being drawn in. The vehicle operator can select the extreme warm setting of 32°C (90°F), but the system will not warm the vehicle any faster or regulate the blower speed. Once the desired temperature is reached, the blower motor, mode, recirculation and temperature will be adjusted automatically by the heater and A/C control.
In warm temperatures, the automatic HVAC system will provide A/C in the most efficient manner. To cool the interior quickly, maximum cool mode is used where the blower is at maximum speed, air temperature actuator is in full cold and the recirculation actuator is drawing air from inside the vehicle. The vehicle operator can select the extreme cool setting of 16°C (60°F), but the system will not cool the vehicle any faster or regulate the blower speed. Once the desired temperature is reached, the blower motor, mode, recirculation and temperature will be adjusted automatically by the HVAC control module.