Fog and Cornering Lamp Replacement
REMOVAL PROCEDURE1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
2. Remove the corning lamp socket from the fog and cornering lamp.
3. Remove the wire harness from the loom on the fog and cornering lamp.
4. Disconnect the electrical connections from the fog and cornering lamp.
5. Release the fog lamp bulb/socket retaining tabs.
6. Remove the fog lamp bulb/socket from the fog lamp.
7. Remove the fog lamp screws from the fog lamp.
8. Remove the fog/cornering lamp from the vehicle.
INSTALLATION PROCEDURE
1. Position the fog/cornering lamp to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fog lamp screws to the tog lamp.
Tighten
Tighten the fog lamp screws to 2 N.m (18 lb in).
3. Install the fog lamp bulb/socket to the fog lamp.
4. Engage the retaining tangs to secure the fog lamp bulb/socket.
5. Connect the electrical connectors to the fog and cornering lamp.
6. Install the wire harness to the loom on the fog and cornering lamp.
7. Install the cornering lamp socket to the fog/cornering lamp.
8. Lower the vehicle.