Horn: Service and Repair
HORN REPLACEMENTREMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Disconnect the electrical connectors from the horn assembly.
3. Remove the horn bracket bolt (1).
4. Remove the horn assembly from the vehicle.
5. Remove the horn bolt and horn from the bracket.
INSTALLATION PROCEDURE
1. Position the horn to the bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the horn bolt.
Tighten
Tighten the horn bolt to 12 N.m (106 lb in).
3. Align the horn assembly to the frame.
4. Install the horn bracket bolt (1).
Tighten
Tighten the horn bracket bolt (1) to 12 N.m (106 lb in).
5. Connect the electrical connectors to the horn assembly.
6. Lower the vehicle.