Turn Signal Lamp: Description and Operation

TURN SIGNAL LAMPS

The turn signal lamps are activated with the ignition switch in the ON or ACCY position. When the turn signal switch lever is placed in either the left or right position, the respective turn signal lamps will flash. The respective Instrument Cluster (IPC) turn signal indicator, either left or right will also flash. Fuse #3 supplies battery voltage to the [1][2]turn signal lamp flasher K10 through the hazard warning switch. When the turn signal switch is engaged to the "TURN LEFT" position, pulsating voltage is supplied from the turn signal lamp flasher K10 to the LH turn indicator, to the LH park/turn signal lamp and to the LH rear turn signal through the turn signal switch. When the turn signal Switch is engaged to the "TURN RIGHT" position, pulsating voltage is supplied from the turn signal lamp flasher K10 to the RH turn indicator, to the RH park/turn signal lamp and to the RH rear turn signal through the turn signal switch. The LH and RH turn indicators are permanently grounded within the instrument cluster to G103. The LH and RH park/turn signal lamps are permanently grounded to G103. The LH and RH rear turn signals are permanently grounded to G400.