Turn Signal Bulb: Service and Repair

[1][2]TURN SIGNAL LAMP BULB REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Open the rear compartment lid.
2. Open the access door (3) if replacing the passenger side turn signal bulb.




3. Remove the spare tire if replacing the driver's side turn signal bulb. Refer to Spare Wheel and Hold - Down Replacement in Trunk/Liftgate.




4. Remove the [1][2]turn signal lamp bulb/socket from the tail lamp by rotating counterclockwise.
5. Remove the turn signal bulb from the socket.

INSTALLATION PROCEDURE




1. Install the turn signal bulb into the socket.
2. Install the turn signal lamp socket into the tail lamp, rotating clockwise.




3. Install the spare tire if replacement of the driver's side turn signal bulb was performed. Refer to Spare Wheel and Hold - Down Replacement in Trunk/Liftgate.




4. Close the access door (3) if replacement of the passenger side turn signal bulb was performed.
5. Close the rear compartment lid.