Throttle Body Heater Hose Replacement - Inlet
Throttle Body Heater Hose Replacement - InletRemoval Procedure
1. Partially drain the cooling system.
2. Remove the intake manifold.
3. Remove the inlet hose (3) from the engine coolant bridge.
4. Remove the inlet hose from the throttle body.
5. Remove the inlet hose while noting the routing.
Installation Procedure
1. Install the inlet hose, routing as noted during removal.
2. Install the inlet hose to the throttle body.
3. Install the inlet hose (3) to the engine coolant bridge.
4. Install the intake manifold.
5. Fill the cooling system.