SIR Module Cover Replacement
SIR MODULE COVER REPLACEMENTREMOVAL PROCEDURE
1. Disable the SIR system.
2. Remove the right side instrument panel access panel.
3. Remove the outer air deflector screw.
4. Remove the air deflector.
5. Remove the outer air deflector bracket screws and remove the air deflector bracket from the IP carrier.
6. Open the instrument panel compartment.
7. Remove the lower - module cover screws.
8. Remove the upper module cover bolt.
9. Remove the inflatable restraint module cover from instrument panel.
INSTALLATION PROCEDURE
1. Install the inflatable restraint module cover to instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the upper module cover bolt.
Tighten
Tighten the upper module cover bolt to 3 N.m (27 lb in).
3. Install the lower module cover screws.
Tighten
Tighten the lower module cover screws to 8 N.m (71 lb in).
4. Close the instrument panel compartment.
5. Install the outer air deflector bracket to the IP carrier.
6. Install the screws to the outer air deflector bracket.
Tighten
Tighten the outer air deflector bracket screws to 2 N.m (18 lb in).
7. Install the outer air deflector.
8. Install the outer air deflector screw.
Tighten
Tighten the deflector screw to 2 N.m (18 lb in).
9. Install the right side access panel.
10. Enable the SIR system.