Operation CHARM: Car repair manuals for everyone.

Front Seat Heater Switch Replacement




Front Seat Heater Switch Replacement

Removal Procedure




1. With a small flat-bladed tool pry on the side of the front heated seat switch and remove from the instrument panel (I/P) accessory trim panel. Driver side shown, passenger side similar.
2. This will disengage the heated seat switch from the electrical connector.

Installation Procedure




1. Align the heated seat switch with the electrical connector in the I/P accessory trim plate. Driver side shown, passenger side similar.
2. Push inward on the heated seat switch until fully seated in the I/P accessory trim plate.
This will engage the heated seat switch to the electrical connector.