Rear Axle - Assemble

Rear Axle - Assemble

^ Tools Required
- J 26234 Seal Installer
- J 42108 Seal Installer





1. Assemble and install the drive pinion to the rear axle housing.
2. Install the differential drive pinion seal (1) to the differential.
3. Measure the side bearing preload.
4. Install the differential carrier to the housing.
5. Establish the pinion gear depth.
6. Inspect the backlash.





7. Use the J26234 in order to install the drive axle seals (1) to the housing
8. Install the rear axle housing cover.





Notice: Refer to Fastener Notice in Service Precautions.

9. Install the rear axle housing cover bolts (1).
^ Tighten the rear axle housing cover bolts (1) to 60 Nm (44 ft. lbs.).