Window/Division Channel - Rear Door Stationary

REMOVAL PROCEDURE




1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the inner belt sealing strip.
4. Remove the outer belt sealing strip.
5. Remove the door window weather strip.
6. Remove the window and division channel screws.




7. Pull the channel away from the stationary window and the rear door.




8. Remove the channel weatherstrip.
9. Remove the rear door stationary window.

INSTALLATION PROCEDURE




1. Install the stationary window into the rear door.
2. Install the window/division channel weatherstrip.




3. Install the window/division channel through the rear door.
4. Seat the channel on the window.

NOTE: Refer to Fastener Notice in Service Precautions.




5. Install the window division channel screws.

Tighten
Tighten the window division channel screws to 7 N.m (62 lb in).

6. Install the door window weather strip.
7. Install the outer belt sealing strip.
8. Install the inner belt sealing strip.
9. Install the water deflector.
10. Install the door trim panel.