External Foot With Mast
REMOVAL PROCEDUREUse a razor blade or a putty knife in order to cut the double back tape material while lifting up on the external foot.
INSTALLATION PROCEDURE
1. Clean the exterior glass (4) and the external foot (1) with alcohol.
2. Dry the components thoroughly using a lint free cloth.
3. Apply new double-back tape.
4. Mount the foot (1) 152 mm (6 in) from the right window edge midway between the antenna gridline and the defogger gridline.
5. Press firmly on all 4 corners in order to ensure proper bonding between the adhesive and the glass.
"For the description of RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at the Vehicle/Application and ID." RPO Codes