Rear Seat Cushion Replacement

Rear Seat Cushion Replacement

Removal Procedure

Caution: Refer to SIR Handling Caution in Cautions and Notices.




1. Push in and up on the front of the rear seat cushion.
2. Lift up and out on the seat cushion.
3. Disconnect heated seat electrical connectors (if equipped).
4. Remove the rear seat cushion from the vehicle.



Installation Procedure





1. Install the rear seat cushion into the vehicle.
2. Connect the heated seat electrical connectors (if equipped).
3. Engage the two locator tabs, on the seat bottom, under the seat back.

Important: Pull up on the front of the rear seat cushion to ensure that the cushion is secure.


4. Push down and rearward to seat the rear seat cushion into the latches in the number four bar.