Center Seat Replacement (w/o UV8)

Center Seat Replacement (w/o UV8)

Removal Procedure
Caution: Refer toSIR Caution in Cautions and Notices.

1. Adjust both the left and the right front seats to the rear.




2. Remove the 2 front center seat to floor fasteners (1).
3. Adjust both the left and the right front seats forward.
4. Remove the 2 rear center seat to floor fasteners (2).
5. Lift the center seat (3) in order to access the electrical connector (4).
6. Remove the front center seat (3) from the vehicle.



Installation Procedure





1. Install the center seat (3) to the vehicle.
2. Connect the center seat electrical connector (4).
3. Adjust both the left and the right front seats forward.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the 2 rear fasteners (2) to the center seat. (3).

Tighten the fasteners (2) to 9 N.m (80 lb in).

5. Adjust both the left and the right front seats to the rear.
6. Install the 2 front fasteners (1) to the center seat (3).

Tighten the fasteners (1) to 9 N.m (80 lb in).