Rear Object Alarm Detection Module Replacement

REMOVAL PROCEDURE




1. Remove the right rear compartment side trim.




2. Insert a small bladed screwdriver under locking tab and unlock connector.
3. Disconnect the connector from the rear object detection module.




4. Remove the mounting nuts.
5. Remove the rear object detection module.

INSTALLATION PROCEDURE




1. Install the rear object detection module.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the rear object detection module mounting nuts.

Tighten
Tighten the rear object detection module mounting nuts to 9 N.m (80 lb in).




3. Install electrical connector and press in locking tab.
4. Install the rear compartment side trim.