Radio, Stereo, and Compact Disc: Service and Repair
AUDIO/VIDEO WIRING HARNESS REPLACEMENTREMOVAL PROCEDURE
1. Remove the rear HVAC control.
2. Remove the 2 console hinge fasteners (2), located under the rear HVAC control. (The graphic shown is a SeVille console. The DeVille console fasteners are in similar locations.)
3. Open the center console lid.
4. Remove the air vent (3) from the console.
5. Remove the upper hinge fasteners (1).
6. Disconnect the electrical connectors from the auxiliary video jacks and the auxiliary outlets.
7. Remove the center console endcap.
8. Remove the 2 fasteners (1) that retain the accessory outlet plate to the center console.
9. Remove the accessory outlet plate from the center console endcap.
INSTALLATION PROCEDURE
1. Install the accessory outlet plate to the center console endcap.
2. Install the fasteners (1) to the accessory outlet plate.
3. Partially install the center console endcap.
4. Connect the electrical connectors to the auxiliary outlets and video jacks.
5. Align and install the center console endcap.
6. Install the center console upper hinge fasteners (1). (The graphic shown is a SeVille console. The DeVille console fasteners are in similar locations.)
7. Install the center console lower hinge fasteners (2).
8. Install the center console air vent (3).
9. Install the rear HVAC control. HVAC Control Module Replacement - Auxiliary in HVAC Automatic.