124. Generator Installation

Generator Installation





1. Place the generator in position.
2. Install the generator side bolts finger tight.





3. Install the generator front bolts finger tight.

Notice: Refer to Fastener Notice in Service Precautions.

4. Tighten the generator bolts in the following sequence:
^ Tighten the generator front upper bolt to 50 Nm (37 ft. lbs.).
^ Tighten the generator side front bolt to 50 Nm (37 ft. lbs.).
^ Tighten the generator side rear bolt to 50 Nm (37 ft. lbs.).
^ Tighten the generator front lower bolt to 50 Nm (37 ft. lbs.).