Cornering Lamp Replacement

REMOVAL PROCEDURE




1. Remove the front air deflector.
2. Disconnect the electrical connector from the cornering lamp assembly.




3. Remove the cornering lamp fasteners.
4. Remove the cornering lamp assembly from the front fascia.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the cornering lamp assembly to the front fascia.
2. Install the cornering lamp fasteners.

Tighten
Tighten the fasteners to 2 N.m (18 lb in).




3. Connect the electrical connector to the cornering lamp assembly.
4. Install the front air deflector.