Surge Tank Pipe Replacement - Inlet
Surge Tank Pipe Replacement - InletRemoval Procedure
1. Remove the fuel injector sight shield. in Engine Mechanical-4.6L.
2. Partially drain the engine coolant.
3. Disconnect the surge tank inlet hose (2) from the surge tank (1).
4. Remove the PCV fresh air tube (1).
5. Disconnect the surge tank inlet hose from the engine.
6. Remove the two push nuts attaching the pipe to the engine.
7. Remove the surge tank inlet hose/pipe assembly from the vehicle.
Installation Procedure
1. Install the surge tank inlet hose/pipe assembly to the vehicle.
2. Install the two push nuts attaching the pipe to the engine.
3. Connect the surge tank inlet hose to the engine.
4. Install the PCV fresh air tube (1).
5. Connect the surge tank inlet hose (2) to the surge tank (1).
6. Fill the cooling system.
7. Install the fuel injector sight shield.