Surge Tank Pipe Replacement - Outlet

Surge Tank Pipe Replacement - Outlet

^ Tools Required
- J 37097-A Hose Clamp Remover/Installer
- J 38185 Hose Clamp Pliers

Removal Procedure





1. Partially drain the engine coolant.
2. Position the J 37097-A (3) to the clamp in order to remove the surge tank outlet hose (2) from the surge tank (1).





3. Position the J 38185 (3) to the clamp in order to remove the surge tank outlet hose (1) from the heater pipe (2).





4. Remove the two push nuts (2) attaching the surge tank outlet hose (1) to the dash panel.
5. Remove the surge tank outlet hose (1) from vehicle.

Installation Procedure





1. Position the surge tank outlet hose (1) over the studs at the dash panel.
2. Install the two push nuts (2) attaching the surge tank outlet hose (1) to the dash panel.





3. Position the J 38185 (3) to the clamp in order to connect the surge tank outlet hose (1) to the heater pipe (2).





4. Position the J 37097-A (3) to the clamp in order to connect the surge tank outlet hose (2) to the surge tank (1).
5. Fill the cooling system.