Inflatable Restraint Side Impact Module Wiring Harness Replace
REMOVAL PROCEDURECAUTION: Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the inflatable restraint side impact inflator module (2) from seat (1).
3. With seat back panel remove the inflatable restraint side impact inflator module wiring harness (3) will be expose.
4. Remove the retaining clips that fasten the side inflator module wiring harness (3) to the seat (1).
INSTALLATION PROCEDURE
1. Install new side inflator module wiring harness (3) to seat (1).
2. Install retaining clips that fasten the side impact inflator module wiring harness (3) to the seat (1).
3. Install the inflatable restraint side impact inflator module (2) to seat (1).
4. Enable the SIR system.