Programming Features - With Tech 2

ENTER PROGRAMMING
To enter programming with the Tech 2, perform the following actions:
1. Install the scan tool.
2. Turn ON the ignition with the engine OFF.
3. Select the correct vehicle and model year.
4. Select Body.
5. Select Personalization.

AUTOMATIC DOOR LOCKS
Continue with the following steps in order to program the automatic door locks:
1. Select Set Options.
2. Select Driver #1 Automatic Door Lock Mode or Driver #2 Automatic Door Lock Mode.
3. Highlight the desired mode from the following choices (refer to Automatic Door Locks modes above for mode descriptions):
^ Mode 0
^ Mode 1
^ Mode 2
^ Mode 3
^ Mode 4
^ Mode 5
4. Exit from the menu.

DRIVER ID:
Continue with the following steps in order to enter a new driver ID:
1. Select Driver Information Center.
2. Select Driver #1 or Driver #2.
3. Select Driver #1 Name or Driver #2 Name (depending on your previous choice).
4. The Tech 2 tool displays directions for entering the Driver's Name. Read and press Enter.
5. Spell the Drivers name by highlighting the correct character and pressing enter.
6. Repeat until the drivers name is spelled correctly.
7. Exit from the menu.

PARALLEL PARK ASSIST
Continue with the following steps in order to program the parallel park assist feature:
1. Select Set Options
2. Select Driver #1 Curb View or Driver #2 Curb View.
3. Highlight Parallel Park Assist and press the ENTER button to turn the feature ON or OFF. An asterisk appears when the feature is turned ON.
4. Exit from the menu.

PERIMETER LIGHTING
Continue with the following steps in order to program the perimeter lighting feature:
1. Select Set Options.
2. Select Driver #1 Perimeter Lighting, Driver #2 Perimeter Lighting or Driver #3 & Driver #4 Perimeter Lighting.
3. Highlight Perimeter Lighting and press the ENTER button to turn the feature ON or OFF. An asterisk appears when the feature is turned ON.
4. Exit from the menu.

REMOTE ACTIVATION VERIFICATION
Continue with the following steps in order to program the remote activation verification feature:
1. Select Driver Information Center.
2. Select Driver #1, Driver #2, or Driver #3 & #4.
3. Select Driver #1 key Fob Options, Driver #2 Key Fob Options, or Driver #3 & #4 key Fob Options (depending on your previous choice).
4. Highlight the desired mode from the following choices (see Remote Activation Verification modes above for mode descriptions):
^ Mode 0
^ Mode 1
^ Mode 2
^ Mode 3
^ Mode 4
^ Mode 5
5. Press the ENTER button to turn the mode ON or OFF. An asterisk appears beside the current mode. (You must turn the current mode OFF before you can turn another one ON.)
6. Exit from the menu.